Home / UPLplus Linear Motors / UPLplus-80-L

UPLplus-80-L

UPLplus-80-L Series

Dimensional Drawing

UPLplus-80-L Dimensional Drawing

Primary Part Mechanical Parameters

Parameter Symbol Unit 80-120 80-180 80-240 80-300
Block length LPRIM mm 146 206 266 326
Coil unit length L1 mm 129.5 189.5 249.5 309.5
Maximum mounting length L2 mm 123 183 243 303
Mounting holes n1 pcs 5 8 11 14
Hole spacing c1 mm 20 20 20 20
Mass m g 232 342 452 552

Secondary Part Mechanical Parameters

Parameter Symbol Unit 80-90-SEK 80-120-SEK 80-390-SEK
Length LSEK mm 90 120 390
Mounting holes n2 pcs 3 4 13
Hole spacing c2 mm 30 30 30
Mass m g 1231 1641 5340
Pole pair width 2tp mm 30 30 30

Electrical Performance Data

Parameter Symbol Unit 80-120 80-180 80-240 80-300
Max impulse force (1s) Fmp N 903 1354 1805 2257
Peak force (3s) Fp N 521 782 1042 1303
Nominal force, cooled * Fcw N 125 187 249 311
Nominal force, not cooled Fc N 89 133 177 221
Max impulse current (1s) Imp Arms 33.0 33.0 33.0 33.0
Peak current (3s) Ip Arms 19.0 19.0 19.0 19.0
Nominal current, cooled Icw Arms 4.5 4.5 4.5 4.5
Nominal current, not cooled Ic Arms 3.2 3.2 3.2 3.2
Power loss Fp (25°C) Plp W 2427 3641 4855 6069
Power loss Fcw (140°C) Plcw W 201 301 402 502
Power loss Fc (140°C) Plc W 102 152 203 254
Motor constant (25°C) km N/√W 10.6 13.0 15.0 16.7
Force constant kf N/Arms 27.4 41.1 54.8 68.5
Back EMF constant, phase to phase ku V/(m/s) 22.4 33.5 44.7 55.9
Limit speed vp m/s 21.4 12.8 8.5 5.9
Electrical resistance, phase to phase (25°C) R25 Ω 4.5 6.7 8.9 11.2
Thermal resistance Rth K/W 0.57 0.38 0.29 0.23
Thermal time constant tth s 116 116 116 116
Temperature sensors — — PTC, Pt1000 PTC, Pt1000 PTC, Pt1000 PTC, Pt1000
Inductance, phase to phase L mH 1.4 2.1 2.8 3.5
Electrical time constant tel ms 0.31 0.31 0.31 0.31
Permissible winding temperature θ °C 140 140 140 140
DC link voltage (max) UDCL V 600 600 600 600

Notes

  • All values at 25°C unless otherwise stated
  • * Cooled: 25°C at mounting base
  • ±10% tolerance on electrical values
ESC
連結已複製！