myonic RA (standard) and RKA (flanged) series are dismountable angular contact bearings. They must be operated under axial preload and are typically installed in pairs (DB, DF, DT configurations). This design allows for larger ball diameters, providing higher stiffness and load capacity than radial deep groove ball bearings of the same size.
These bearings are supplied with the following specifications:
- Solid ball cage made of synthetic material
- Contact angle between 17 deg and 22 deg
- Accuracy class P5P or higher
Ball quantities shown in blue in the table are standard designs
| d | D | B | Designation | Li | Lo | r max | h min | Ball Set | C (N) | Co (N) | Coa (N) |
|---|
Please select a bearing from the left
(Inch dimension series)
These bearings are supplied with the following specifications:
- Solid ball cage made of synthetic material
- Contact angle between 17 deg and 22 deg
- Accuracy class A5P (inch dimensions) or higher
Ball quantities shown in blue in the table are standard designs
| d | D | B | Designation | Li | Lo | r max | h min | Ball Set | C (N) | Co (N) | Coa (N) |
|---|
These bearings are supplied with the following specifications:
- Solid ball cage made of synthetic material
- Contact angle between 17 deg and 22 deg
- Accuracy class P5P or higher
Ball quantities shown in blue in the table are standard designs
| d | D | B | Dc | Bc | Designation | Li | Lo | r max | h min | Ball Set | C (N) | Co (N) | Coa (N) |
|---|
(Inch flanged series)
These bearings are supplied with the following specifications:
- Solid ball cage made of synthetic material
- Contact angle between 17 deg and 22 deg
- Accuracy class A5P (inch dimensions) or higher
Ball quantities shown in blue in the table are standard designs
| d | D | B | Dc | Bc | Designation | Li | Lo | r max | h min | Ball Set | C (N) | Co (N) | Coa (N) |
|---|