Guiding System Technical Data
General Information
General Application Conditions
General application range under normal operating conditions.
| Parameter | Value | Unit |
|---|---|---|
| Maximum Speed | 5 | m/s |
| Maximum Acceleration | 500 | m/s2 |
Higher values are permissible but depend on carriage type, lubrication condition, preload, and load.
Operating Environment
| Parameter | Value | Remarks |
|---|---|---|
| Operating Temperature Range | -30 C to +80 C | IP30 (for AMSABS SL) |
| Transport Temperature | -20 C to +70 C | - |
| Storage Conditions | 0 C to +40 C | DIN 50015 climate conditions |
| Humidity | Below 75% | Prevent condensation, corrosion, and dew formation |
Storage Recommendations
Storage in original condition packaging is recommended. High humidity and extreme temperature changes must be avoided. Otherwise there is a risk of condensation, which may lead to corrosion and oil separation from grease.
Materials
| Component | Material | Treatment |
|---|---|---|
| Rail | Ball bearing steel | Hardened raceway surface |
| Carriage | Ball bearing steel | Fully hardened |
| Rolling Elements | Ball bearing steel | Fully hardened |
| Synthetic Components | POM plastic | Injection molded |
Safety Instructions
Safety Guidance
If the carriage is overloaded, insufficiently lubricated, or improperly maintained, the carriage may detach from the rail. Appropriate design and technical safety measures must be taken by the user to prevent any risk of carriage separation from the rail due to loss of rolling elements.
Possible safety measures include, for example, installing safety clamps around the rail. Regulations of professional associations, relevant guidelines, and application-related standards must be observed.