SBS Ball Screws - Product Specification

Double Nut with 2-Point O-Preload

• Preload Adjustment - Preload adjustment by aligning the flange nut and lock nut using a ground wedge key
• Stable Low No-Load Torque - Low torque maintained at high rigidity
• High Precision Positioning - Precise positioning even at low speeds and oscillating short stroke movements
• 2-Point Ball Contact - Better efficiency compared to 4-point ball contact
• Optimal Technical Solution - Minimal heat generation and minimal wear

Single Nut with 4-Point X-Preload

• Ball Sorting Preload - Single nut preloaded by ball sorting with 4-point ball contact between nut and screw
• Compact Design - Requires shorter screw length than double nut for the same stroke
• Production Tolerance Considerations - Due to production tolerances, single nuts are mainly used for shorter ball screws
• Load Peak Protection - No inadmissible complete ball disengagement even during load peaks
• Economical Manufacturing - Single nut ball screws can be manufactured more economically than double nuts

Wiper Systems

Brush Wiper BW

• Suitable for normal loads
• Length dimension l₂ (standard)
• Very compact design
• Completely integrated into the nut body

Finger Wiper FW

• High-performance seal for heavy loads
• Length dimension l₂ + 20 mm
• Sealing lip adapts to contour geometry
• Ground screw outer diameter enables optimal sealing efficiency

Double Wiper DW

• Combination of brush wiper and finger wiper
• Length dimension l₂ + 20 mm
• Provides optimal protection

Ordering Information