myonic standard radial deep groove ball bearings are designed for precision applications. This page provides a complete interactive selection tool. You can click any model in the list, and the calculator on the right will automatically load that model's parameters ($C, C_0$), allowing you to instantly estimate service life.
Product Classification 
Dimension Definition 
| d | D | B | Bf | Designation (Open) | Designation (Closed) | DIN B | DIN Bf | Li | Lo | r max | h min | Ball Set | C (N) | Co (N) |
|---|
Life Calculator
Please select a bearing from the left
Rated Life L10h --- hours
Product Classification 
Dimension Definition 
| d (mm) | d (inch) | D (mm) | D (inch) | B (mm) | B (inch) | Bf (mm) | Bf (inch) | Designation (Open) | Designation (Closed) | US Designation | Li | Lo | r max | h min | Ball Set | C (N) | Co (N) |
|---|
Product Classification 
Dimension Definition 
(Thickened outer ring for special mounting)
| Designation | d (mm) | D (mm) | B (mm) | Bf (mm) | Li (mm) | Lo (mm) | r max (mm) | h min (mm) | Ball Set | C (N) | Co (N) |
|---|
Product Classification 
Dimension Definition 
(Inner ring width Bi > Outer ring width Be)
| d (mm) | D (mm) | B (mm) | Bf (mm) | Designation (open) | Designation (closed) | Bn (mm) | Dc (mm) | Bc (mm) | Bcf (mm) | Bnf (mm) | Li (mm) | Lo (mm) | r max (mm) | h min (mm) | Ball Set | C (N) | Co (N) |
|---|
| 1 Tolerance for Dc: | 0 | 0 |
|---|---|---|
| -125 um | -.005" |
| 2 Tolerance for Bc and Bcf: | 0 | 0 |
|---|---|---|
| -50 um | -.002" |
Product Classification 
Dimension Definition 
(With flange for easy mounting and positioning)
| d (mm) | D (mm) | B (mm) | Bf (mm) | Designation (open) | Designation (closed) | DIN (B) | DIN (Bf) | Dc (mm) | Bc (mm) | Bcf (mm) | Li (mm) | Lo (mm) | r max (mm) | h min (mm) | Ball Set | C (N) | Co (N) |
|---|
Inch Dimensions
Product Classification 
Dimension Definition
| d mm / inch | D mm / inch | B mm / inch | Bf mm / inch | Designation (open) | Designation (closed) | US | Dc mm / inch | Bc mm / inch | Bcf mm / inch | Li mm / inch | Lo mm / inch | r max mm / inch | h min mm / inch | Balls n x diam | C (N) | Co (N) |
|---|
| 1 Tolerance for Dc: | 0 | 0 |
| -125 um | -.005" |
| 2 Tolerance for Bc and Bcf: | 0 | 0 |
| -50 um | -.002" |